prikaz prve stranice dokumenta Primjena mikroskopije u industrijskim mjerenjima
  Download
PDF 3.61 MB
undergraduate thesis
Primjena mikroskopije u industrijskim mjerenjima
2023. urn:nbn:hr:212:535617
Cvek, Roko
Istrian University of applied sciences

Cite this document

Cvek, R. (2023). Primjena mikroskopije u industrijskim mjerenjima (Undergraduate thesis). Pula: Istrian University of applied sciences. Retrieved from https://urn.nsk.hr/urn:nbn:hr:212:535617

Cvek, Roko. "Primjena mikroskopije u industrijskim mjerenjima." Undergraduate thesis, Istrian University of applied sciences, 2023. https://urn.nsk.hr/urn:nbn:hr:212:535617

Cvek, Roko. "Primjena mikroskopije u industrijskim mjerenjima." Undergraduate thesis, Istrian University of applied sciences, 2023. https://urn.nsk.hr/urn:nbn:hr:212:535617

Cvek, R. (2023). 'Primjena mikroskopije u industrijskim mjerenjima', Undergraduate thesis, Istrian University of applied sciences, accessed 03 December 2024, https://urn.nsk.hr/urn:nbn:hr:212:535617

Cvek R. Primjena mikroskopije u industrijskim mjerenjima [Undergraduate thesis]. Pula: Istrian University of applied sciences; 2023 [cited 2024 December 03] Available at: https://urn.nsk.hr/urn:nbn:hr:212:535617

R. Cvek, "Primjena mikroskopije u industrijskim mjerenjima", Undergraduate thesis, Istrian University of applied sciences, Pula, 2023. Available at: https://urn.nsk.hr/urn:nbn:hr:212:535617

Please login to the repository to save this object to your list.
Metadata
TitlePrimjena mikroskopije u industrijskim mjerenjima
Title (english)Application of microscopy in industrial measurements
AuthorRoko Cvek
MentorVedrana Špada (mentor)
Committee memberJosipa Bilić (predsjednik povjerenstva)
Committee memberVedrana Špada (član povjerenstva)
Committee memberIvan Lorencin (član povjerenstva)
GranterIstrian University of applied sciences
Pula
Defense date and country2023-09-29, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Ovaj rad istražuje mikrostrukturne promjene aluminijske legure u zoni utjecaja topline do kojih dolazi radi unosa topline pri primjeni TIG postupka (eng. tungsten inert gas) kod ravnanja limova u Tehnomont Brodogradilištu d.o.o.. Promjene u mikrostrukturi analizirane su metalografski primjenom mikroskopije kao mjeriteljske metode s industrijskom primjenom. Mikroskopija se pokazala kao jedna od mjeriteljskih metoda koja vrlo brzo i jednostavno može dati sud o provedenom postupku ravnanja i provjeriti kvalitetu materijala po provedenim tehnološkim postupcima s različitim korištenim parametrima.
Abstract (english)
This paper investigates the microstructural changes of an aluminum alloy in the heat-affected zone, which occur due to heat input during the application of the TIG process (tungsten inert gas) when straightening sheets in Tehnomont Shipyard. The changes in the microstructure were analyzed metallographically using microscopy as a measurement method with industrial application. Microscopy has proven to be one of the metrology methods that can quickly and simply make a judgment about the straightening procedure carried out and check the quality of the material according to the technological procedures carried out with different parameters used.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:212:535617
Study programmeTitle: Undergraduate professional study program in Mechatronics.
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka mehatronike (stručni prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka mehatronike)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2023-10-04 06:45:31